Other Products

Handheld Testers

Digital Multi-Meters TY700 & TY500 Series

TY700 Series Product Overview

High Precision:

• Basic accuracy 0.02%
• True RMS measurement

New functions for electronic & industrial use:

• Simultaneous measurement & display of DC and AC
• Switchable RMS / Mean detection*
• Low pass filter (LPF)*
• AC 50mV range*
• Lo-Power resistance measurement*
• * = TY720 only

Full support for Data Management

• Large capacity logging-mode memory
• TY720: 10,000 data
• TY710: 1,000 data
• USB communication, application software (optional DMM communcation package)

Safe Design & Wide Temperature Range for Harsh Use

• Conforms to safety standards EN61010-1 10000V CAT III, 600V CAT IV
• Safety shutters for preventing erroneous insertion of test leads into current terminals
• Operating temperature range: -20 to +55 Deg C
• Storage temperature range: -40 to +70 Deg C

Closed Case Calibration

TY500 Series Product Overview

High Precision:

• Basic Accuracy 0.09%
• True RMS measurement

New Functions Include:

• Current direct reading function provided by current clamp sensor (optional)
• Low Pass Filter (LPF)
• Logging Mode Memory for 1600 data*
• USB communication, application software * (optional DMM communication package)
• *TY530

Ensured Field Site Safety:

• Conforms to safety standards EN61010-1 1000V CAT III, 600V CAT IV
• Safety shutters for preventing erroneous insertion of test leads into current terminals

Closed Case Calibration

Download PDF

Thermocouple Calibration Sources

• Signal Source: DCV, DCA, OHM, RTD, TC (10 kinds), Frequency, Pulse
• Measurement: DCV, DCA, OHM, RTD, TC (10 kinds), Frequency, Pulse
• Features: Highly accurate within 0.02% of the DC voltage range for source and measure
• Source and measurement can be performed simultaneously
• Vertical type with large-screen display
• Loop power supply function (24 VDC at a load of up to 22 mA)
• Possible to measure current in the mA range while supplying power
• Sink function
• Sweep functions that allow 3 types of continuous outputs

Handy Calibrator Model CA11E (Voltage / Current Calibrator)

• Signal Source: DCV (Max. 30V), DCA (Max 24 mA)
• Measurement: DCV (Max 30V), DCA (Max 100 mA)
• Features: Auto step (4 to 20 mA), 20mA SINK, Sweep function

Handy Calibrator Model CA12E (Temperature Calibrator)

• Signal Source: TC (10 kinds), TRD, DC100 mV, 400
• Measurement: TC (10 kinds), RTD, DC100 mV, 400
• Features: Selectable RTD (Pt100 or JPt100)
• Built-in RJC

Handy Calibrator Model CA71

• Signal Source: DCV, DCA, Resistance, RTD, TC (10 kinds), Frequency, Pulse
• Measurement: DCV, DCA, Resistance, RTD, TC (10 kinds), Frequency, Pulse
• Features: Simultaneous signal source and measurement capacity, wide array of useful functions, easy operation, online communication function

Handy Calibrator Model CA51

• Signal Source: DCV, DCA, Resistance, RTD, TC (10 kinds), Frequency, Pulse
• Measurement: DCV, DCA, Reistance, Frequency, Pulse
• Features: Simultaneous signal source and measurement capacity, wide array of useful functions, easy operation

Download PDF

Clamp-on Probes AC / DC & Leakage Current Devices

AC Current Devices:

• CL120 (Mean Value) - 20A / 200A, 40Hz to 1KHz
• CL130 (Mean Value) - 200A / 600A, 40 Hz to 1KHz
• CL135 (True RMS) - 200A / 600A, 40Hz to 1KHz
• CL150 (Mean Value) - 400A / 2000A, 40Hz to 1KHz
• CL155 (True RMS) - 400A / 2000A, 40Hz to 1KHz

AC / DC Current Devices

• CL220 (Mean Value) - 40A / 300A (AC & DC), 20HZ to 1KHz
• CL235 (True RMS) - 400A / 600A (AC) 400A / 1000A (DC), 40Hz to 1KHz
• CL250 (Mean Value) - 400A / 2000A (AC & DC), 40Hz to 1KHz
• CL255 (True RMS) - 40A / 300A (AC & DC), 30Hz to 1KHz

Leakage Current Devices

• 30031A / 30032A (Mean Value) - 3/30mA / 30/60A, 50Hz/60Hz
• CL320 (Mean Value) - 20/200mA, 200A, 40Hz to 400Hz
• CL340 (Mean Value) - 40/400mA, 400A, 20Hz to 1KHz
• CL345 (True RMS) - 40/400mA, 400A, 20Hz to 1KHz
• CL360 (Mean Value) - 200mA / 2A / 20A / 200A / 1000A, 40Hz to 1KHz

Download PDF

CW Power Meters

CW120 / 121 Product Overview

• The CW120 series can be used for voltage measurements up to 495V
• A variety of connection types are supported, from single-phase 2-wire to three-phase 4-wire
• CW120: Three-phase 3-wire model
• CW121: Three-phase 4-wire model
• Continuous measurement integration (accurate measurements can be obtained even if there are large load fluctuations)
• Plus/minus signs are shown for reactive power and power factor
• The data saving interval can be set in the range of one second to one hour

Download PDF

CW240 Product Overview

• Simultaneous measurement of instantaneous value, electric energy, demand, harmonics and voltage fluctuation
• Simultaneous measurement of loads in 4 systems of up to 1P2W
• Simultaneous measurement of loads in 2 systems of up to 1P / 3P3W
• Data saving interval can be set from 1 waveform (for instantaneous measurement) to 1 hour
• Measure up to 50th order harmonics
• 4ch leakage current measurement using newly released clamp probes 96036
• Long time data logging by using compact flash memory
• 2ch analogue input (Optional)
• Equipped with 4ch analogue output (recorder output)
• AC adaptor for power supply, NiMH rechargeable battery and alkaline battery for backup

Download PDF

Datum-Y (XL120 series)
Portable Data Station (Data Logger)

• All channels adopt universal insulated inputs: The temperature and voltage can be set independently for each channel.
• Easy-to-read screen display: A wide view color TFT LCD makes it easy to read even outdoors
• Data can be saved at the maximum speed of 100mx: Reliably measures temperature chances
• Large amounts of data can be acquired: Employs compact flash and SD cards, USB memory enables support for a data copy function
• Comes standard with LAN port: Also supports remote data acquisition

Web Server Function
You can easily monitor the Datum-Y screens with the Internet Explorer*1 Web browser (screen display can be updated every 5, 10, or 30 seconds automatically, or manually). You can use Operator Page to remotely operate Datum-Y, except for turning the power on and off and key locking. You can use Monitor Page just to check and switch the Datum-Y screens. You can set access authentication for each screen to enhance security.
*1: Internet Explorer is a registered trademark of Microsoft Corporation.

FTP Server Function
You can output a list of files stored in Datum-Y's internal memory and connected external storage media, and you can transfer and delete files.

Download PDF